Updated November 2026

A zercom colorpoint ice fishing flasher shows you what is beneath the hole before you drop a line, so you can find fish, judge their depth and see whether they are interested in your bait. This guide walks through the basic setup, the settings that matter most and how to read the display once you are on the ice. Work through the steps in order and you will have a unit that is ready to use the next time you drill.

Before You Head Out: Power and Transducer Checks

Most flashers of this type run off a 12-volt battery, and a weak battery is the most common reason a unit seems to misbehave. Charge the battery fully at home and check the cable connections before you leave. Manufacturers generally recommend a sealed lead-acid or lithium battery sized for the unit, so confirm the requirement in your owner’s manual before buying a replacement.

Shopping for one? See our guide: Flashers for Ice Fishing: 5 Best Picks Compared (2026).

Check the transducer as well. It should sit flat and fully submerged in the water column, with no air pocket on the face. Keep the cable clear of the hole edge so it does not bind when you move the unit.

Setting Up the Display on the Ice

Once the transducer is in the water, power the unit on and let it settle for a few seconds. Set the depth range so the bottom is visible on the screen, then adjust the sensitivity until the bottom line is clear without a wash of noise filling the display. Start in the middle of the sensitivity range and move it slowly in each direction.

  1. Lower the transducer to the bottom and confirm the bottom reading matches your known depth.
  2. Adjust sensitivity until the bottom return is a solid line with minimal surface clutter.
  3. Set the color or contrast mode so fish arches stand out from the background.
  4. Check the zoom or depth scale, which controls how much of the water column you see at once.

Reading Fish and Structure on the Screen

Fish usually appear as arches or colored marks that rise above the bottom line. A small, tight arch near the bottom often means a fish is close to the bottom, while a larger arch higher in the water can indicate a fish suspended at that depth. Watch how the marks change as you hold the transducer still, because a fish that stays in view and moves toward your bait is a good sign.

Pay attention to the bottom contour as well. Sudden rises, drop-offs and hard-looking bottom returns often point to structure such as weed edges or rock, and fish tend to hold near those features. Mark spots where the bottom changes so you can return to them quickly.

Common Mistakes

  • Running the unit on a low battery, which weakens returns and makes fish harder to read.
  • Setting sensitivity too high, which fills the screen with noise and hides real targets.
  • Letting the transducer sit at an angle or lift out of the water.
  • Ignoring the bottom line, which is your reference for judging fish height.
  • Judging a single arch as a sure fish without watching it over several seconds.
  • Sealed 12-volt battery: A dependable power source keeps the display steady through a full day on the ice. View on Amazon
  • Transducer mounting bracket: A stable mount keeps the transducer flat and submerged so readings stay consistent. View on Amazon
  • Battery charger: A charger suited to your battery type helps you start each trip with full power. View on Amazon

FAQ

How deep can a zercom colorpoint ice fishing flasher read?

Depth range depends on the transducer and the model, so check the manufacturer’s specifications for your unit. Shallow lakes and deep basins both require the depth scale to match the water you are fishing.

Why does my screen look cluttered on the ice?

Clutter usually comes from sensitivity set too high or from air bubbles near the transducer. Lower the sensitivity a step at a time and confirm the transducer is fully submerged.

Do I need to read the manual before using it?

Yes. Each model has its own menu layout and recommended battery, so confirm settings and power requirements in the owner’s manual before your first trip.

Conclusion

A zercom colorpoint ice fishing flasher is simple to run once the power and transducer are right and the sensitivity is set properly. Learn to read the bottom line first, then watch how fish arches behave over time. Check your owner’s manual for model-specific details before you go.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our ice fishing guides, checking product details against manufacturer specifications and owner feedback.